Dead-Blow Hammer

  Head is filled with steel shot and oil that absorb energy when the hammer impacts, eliminating any rebound in demolition and assembly work. Head weighs 240 g to 1.8 kg (8 oz­4 lb). If you are knocking things apart, this will double your power.

 

Head is filled with steel shot and oil that absorb energy when the hammer impacts, eliminating any rebound in demolition and assembly work. Head weighs 240 g to 1.8 kg (8 oz­4 lb). If you are knocking things apart, this will double your power.

More From Reader’s Digest

  • Sliding Compound Miter SawSliding Compound Miter Saw Has a blade assembly that slides along two rods, allowing you to cut wide stock by pulling the assembly toward you. Can make miter cuts up to 45°; tilts to one side to allow compound […] Posted in Home Improvement
  • Heat GunHeat Gun Focuses a controlled amount of heat, usually between 121°C (250°F) and 593°C (1100°F), to soften paint so you can remove it with a scraper. (Do not use on old, lead-based […] Posted in Home Improvement
  • Trim GuardTrim Guard Keeps paint off adjoining straight surfaces. Posted in Home Improvement